vx-501 voltage controlled crystal oscillator base stations test equipment portable equipment switching refow process compatible at-cut crystal low phase noise surface mount package tight stability features typical applications htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 previous vectron model number c5310 frequency range 1 mhz C 700 mhz standard frequencies 2.048; 10; 13; 16.384; 30.720; 32.768; 38.880; 44.8; 51.840; 52.00mhz; 58.9824; 61.44; 68.736; 77.760; 76.8; 81.92; 92.16; 100; 112; 122.88mhz; 125; 134.4; 153.6; 155,52; 156.25; 160; 179.2; 184.32; 245.76; 312.5mhz; 320; 368.64; 400; 448; 491.52; 622.08; 672 mhz parameter min typ max units operating temperature range vs. operating temperature range (referenced to +25c) -15.0 +15.0 ppm -20 +70c parameter min typ max units condition initial tolerance -10.0 +10.0 ppm @vc=vs/2 vs. supply voltage change -3.0 +3.0 ppm v s 5% vs. load change -1.0 +1.0 ppm load 10% vs. aging /1. year -3.0 +3.0 ppm vs. aging / year (followingyears) -1.0 +1.0 ppm frequency stabilities 1 vx-501 page: 1/7
w rf output supply voltage (vs) frequency stabilities 1 htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 parameter min typ max units operating temperature range vs. operating temperature range (referenced to +25c) -30.0 +30.0 ppm -40 +85c parameter min max units condition initial tolerance -15.0 +15.0 ppm @vc=vs/2 vs. supply voltage change -3.0 +3.0 ppm v s 5% vs. load change -2.0 +2.0 ppm load 10% vs. aging /1. year -3.0 +3.0 ppm vs. aging / year (followingyears) -1.0 +1.0 ppm parameter min typ max units condition supply voltage (vs) 4.75 5.0 5.25 vdc current consumption 40 ma @ hcmos current consumption 90 ma @ pecl supply voltage (vs) 3.135 3.3 3.465 vdc current consumption 30 ma @ lvhcmos current consumption 80 ma @ lvpecl current consumption 25 ma @ lvds parameter min typ max units condition signal hcmos load 15.0 pf rise and fall time 5 ns @ 15 pf 10 to 90 % duty cycle 40 60 % @ vs/2 signal pecl load 50 vs - 2v rise and fall time 1 ns 20 to 80 % duty cycle 45 55 % signal lvds load 100 rise and fall time 1 ns 10 to 90 % duty cycle 40 60 % signal sinewave load 50 output power -3 0 3 dbm vx-501 page: 2/7
parameter min typ max units condition tuning range 75.0 90.0 +200.0 ppm frequency > 40mhz 100.0 140.0 200.0 ppm frequency <40mhz linearity 10% tuning slope positive control voltage range 0.0 1.65 3.3 vdc with vs=3.3vdc 0.5 2.5 4.5 vdc with vs=5.0vdc frequency control input impedance 10 k parameter min typ max units condition phase noise -85 dbc/hz 10 hz @52 mhz -115 dbc/hz 100 hz hcmos -138 dbc/hz 1 khz 3,3v -153 dbc/hz 10 khz -155 dbc/hz 100 khz jitter 0,3 ps rms @ 12 khz to 20 mhz phase noise -80 dbc/hz 10 hz @155,52 mhz -105 dbc/hz 100 hz pecl -135 dbc/hz 1 khz 3,3v -143 dbc/hz 10 khz -143 dbc/hz 100 khz jitter 0,6 ps rms @ 12 khz to 20 mhz phase noise -80 dbc/hz 10 hz @155,52 mhz -112 dbc/hz 100 hz lvds -130 dbc/hz 1 khz 3,3v -150 dbc/hz 10 khz -155 dbc/hz 100 khz jitter 0,2 ps rms @ 12 khz to 20 mhz phase noise -55 dbc/hz 10 hz @622,08 mhz -85 dbc/hz 100 hz pecl -115 dbc/hz 1 khz 3,3v -140 dbc/hz 10 khz -150 dbc/hz 100 khz jitter 0,1 ps rms @ 12 khz to 20 mhz weight 2 g processing & packing handling & processing note parameter min typ max units condition supply voltage (vs) 7 v operable temperature range -30 +80 c storage temperature range -40 +90 c additional parameters absolute maximum ratings htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 frequency tuning (efc) vx-501 page: 3/7
type g223b for hcmos version type g218b for hcmos, pecl; lvpecl and lvds version package codes: height h pin length l options 5 height h pin length l options 5 5,9 na 5,9 na dimensions: mm dimensions: mm pin connections pin connections 1 control voltage (vc) 1 control voltage (vc) 2 ground (case) 2 n/c / enable (optional) 3 rf output 3 ground (case) 4 supply voltage input (vs) 4 rf output 5 complementary rf output / (n/c: hcmos only) 6 supply voltage input (vs) outline drawing: g223b outline drawing: g218b enable true table hcmos lvpecl / lvds pin 2 pin 4 pin 5 pin 4 pin 5 high data n/c no data no data open data n/c data compl. data low high tristate n/c data compl. data marking vx-501 frequency ayyww htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 enclosure vx-501 page: 4/7
52 mhz; hcmos output 155,52 mhz; pecl output frequency range [hz] s (f) [db] jitter [ps rms] frequency range s (f) [db] jitter [ps rms] 100hz to 1.5mhz -77db 0.432ps 500hz to 1.5mhz -73.96db 0.205ps 50khz to 1.5mhz -91db 0.086ps 65khz to 1.5mhz -75.87db 0.165ps 12khz to 20mhz -80db 0.306ps 12khz to 20mhz -65.34db 0.553ps 155,52mhz; lvds output 622,08mhz; pecl output frequency range [hz] s (f) [db] jitter [ps rms] frequency range s (f) [db] jitter [ps rms] 100hz to 1.5mhz -83db 0.072ps 1khz to 5mhz -75db 0.048ps 50khz to 1.5mhz -88db 0.041ps 250khz to 5mhz -76db 0.041ps 12khz to 20mhz -76db 0.162ps 12khz to 20mhz -70db 0.082ps typical phase noise and jitter htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 typical tuning slope typical frequency stability vs temperature vx-501 page: 5/7
standard shipping methode (for b-type enclosure) recommanded refow profle htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 *bei w d mm nur untere lochreihe by w d 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k production tolerance complying din iec 286-3 enclosure type tape width w [mm] quantity per meter quantity per reel dimension p g218b / g223b 24 83,3 850 12 profle feature pb-free assembly/ sn-pb assembly profle feature pb-free assembly/ sn-pb assembly average ramp-up rate (t l to t p) 3c/second max. time 25c to peak temperature 8 minutes max. preheat -temperature min t smin -temperature min t smax -time (min to max) t s 150c 200c 60-180 seconds time maintainted above -temperature (t l ) -time (t l ) 217c 60-150 seconds t smax to t l -ramp-up rate 3c/second max time maintainted above -temperature (t l ) -time (t l ) 217c 60-150 seconds time within 5c of actual peak temperature (t p ) 20-40 seconds peak temperature (t p ) max 260c ramp-down rate 6c/ second max note: all temperatures refer to topside of the package, measured on the package body surface. smd oscillators must be on the top side of the pcb during the refow process. vx-501 page: 6/7
use this worksheet to forward the following information to your factory representative: model height - supply voltage code rf output code temperature range - stability frequency control/ enable - frequency vx-501 1 - e a j - 155 x - 10mhz notes: 1 contact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modifcation. 5 contact factory for availability. how to order this product: supply voltage code: d: 5 v e: 3,3 v rf output code: a: hcmos c: pecl d: lvds e: sinewave temperature range/ stability code: j-155: -20...+70c 15ppm e-305: -40...+85c 30ppm height: 0: g223b 1: g218b htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 vx-501 page: 7/7
|